1 UD4016 n-ch 40v fast switching mosfets symbol parameter rating units v ds drain-source voltage 40 v v gs gate-sou r ce voltage 20 v i d @t c =25 continuous drain current, v gs @ 10v 1 75 a i d @t c =100 continuous drain current, v gs @ 10v 1 58 a i dm pulsed drain current 2 150 a eas single pulse avalanche energy 3 190 mj i as avalanche current 47 a p d @t c =25 total power dissipation 4 52.1 w t stg storage temperature range -55 to 150 t j operating junction temperature range -55 to 150 symbol parameter typ. max. unit r ja thermal resistance junction-ambient 1 --- 62 /w r jc thermal resistance junction-case 1 --- 2.4 /w id 40v 6.5m ? 75a the UD4016 is the highest performance trench n-ch mosfets with extreme high cell density , which provide excellent rdson and gate charge for most of the synchronous buck converter applications . the UD4016 meet the rohs and green product requirement 100% eas guaranteed with full function reliability approved. z advanced high cell density trench technology z super low gate charge z excellent cdv/dt effect decline z 100% eas guaranteed z green device available general description features applications z high frequency point-of-load synchronous buck converter for mb/nb/umpc/vga z networking dc-dc power system z ccfl back-light inverter absolute maximum ratings thermal data to252 pin configuration product summery bv dss r ds(on)
2 n-ch 40v fast switching mosfets symbol parameter conditions min. typ. max. unit bv dss drain-source breakdown voltage v gs =0v , i d =250ua 40 --- --- v bv dss / t j bvdss temperature coefficient reference to 25 , i d =1ma --- 0.034 --- v/ v gs =10v , i d =15a --- 5.2 6.5 r ds(on) static drain-source on-resistance 2 v gs =4.5v , i d =12a --- 7 9 m v gs(th) gate threshold voltage 1.0 1.5 2.5 v v gs(th) v gs(th) temperature coefficient v gs =v ds , i d =250ua --- -5.84 --- mv/ v ds =32v , v gs =0v , t j =25 --- --- 1 i dss drain-source leakage current v ds =32v , v gs =0v , t j =55 --- --- 5 ua i gss gate-source leakage current v gs = 20v , v ds =0v --- --- 100 na gfs forward transconductance v ds =5v , i d =15a --- 27 --- s r g gate resistance v ds =0v , v gs =0v , f=1mhz --- 1.4 2.8 q g total gate charge (4.5v) --- 28 --- q gs gate-source charge --- 7.85 --- q gd gate-drain charge v ds =20v , v gs =4.5v , i d =12a --- 12.5 --- nc t d(on) turn-on delay time --- 20.2 --- t r rise time --- 11.8 --- t d(off) turn-off delay time --- 84.8 --- t f fall time v dd =15v , v gs =10v , r g =3.3 i d =1a --- 8.6 --- ns c iss input capacitance --- 3354 --- c oss output capacitance --- 275 --- c rss reverse transfer capacitance v ds =15v , v gs =0v , f=1mhz --- 204 --- pf symbol parameter conditions min. typ. max. unit eas single pulse avalanche energy 5 v dd =25v , l=0.1mh , i as =30a 77.4 --- --- mj symbol parameter conditions min. typ. max. unit i s continuous source current 1,6 --- --- 75 a i sm pulsed source current 2,6 v g =v d =0v , force current --- --- 150 a v sd diode forward voltage 2 v gs =0v , i s =1a , t j =25 --- --- 1 v note : 1.the data tested by surface mounted on a 1 inch 2 fr-4 board with 2oz copper. 2.the data tested by pulsed , pulse width Q 300us , duty cycle Q 2% 3.the eas data shows max. rating . the test condition is v dd =25v,v gs =10v,l=0.1mh,i as =47a 4.the power dissipation is limited by 150 junction temperature 5.the min. value is 100% eas tested guarantee. 6.the data is theoretically the same as i d and i dm , in real applications , should be limited by total power dissipation. electrical characteristics (t j =25 , unless otherwise noted) guaranteed avalanche characteristics diode characteristics UD4016
3 n-ch 40v fast switching mosfets 0 2 4 6 8 10 12 0 0.1 0.2 0.3 0.4 0.5 v ds , drain-to-source voltage (v) i d drain current (a) v gs =10v v gs =7v v gs =5v v gs =4.5v v gs =3v 4 5 6 7 8 246810 v gs (v) r dson (m ? ) i d =12a 0 2 4 6 8 10 12 0 0.2 0.4 0.6 0.8 1 v sd , source-to-drain voltage (v) i s source current(a) t j =150 t j =25 0 2 4 6 8 10 0 15304560 q g , total gate charge (nc) v gs gate to source voltage (v) i d =12a 0 0.5 1 1.5 -50 0 50 100 150 t j ,junction temperature ( ) normalized v gs(th) 0.5 1.0 1.5 2.0 -50 0 50 100 150 t j , junction temperature ( ) normalized on resistance typical characteristics fig.1 typical output characteristics fig.2 on-resistance vs. g-s voltage fig.3 forward characteristics of reverse fig.4 gate-charge characteristics fig.5 normalized v gs(th) vs. t j fig.6 normalized r dson vs. t j UD4016
4 n-ch 40v fast switching mosfets 10 100 1000 10000 1 5 9 13 17 21 25 v ds , drain to source voltage(v) capacitance (pf) f=1.0mhz ciss coss crss 0.01 0.10 1.00 10.00 100.00 1000.00 0.1 1 10 100 v ds (v) i d (a) 10us 100us 10ms 100ms dc t c =25 single pulse 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 t , pulse width (s) normalized thermal response (r jc ) p dm d = t on /t t j peak = t c + p dm x r jc t on t 0.02 0.01 0.05 0.1 0.3 duty=0.5 single pulse fig.8 safe operating area fig.9 normalized maximum transient thermal impedance fig.10 switching time waveform fig.11 unclamped inductive switching wave UD4016
|
